.Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.ZoneStatus

Information

This block outputs single zone status. It includes outputs as following:

• the times for cooling-down (yCooTim) and warm-up (yWarTim) the zone,
• THeaSetOn: the zone occupied heating setpoint,
• yOccHeaHig: if the zone temperature is lower than the occupied heating setpoint,
• TCooSetOn: the zone occupied cooling setpoint,
• yHigOccCoo: if the zone temperature is higher than the occupied cooling setpoint,
• THeaSetOff: the zone unoccupied heating setpoint,
• yUnoHeaHig: if the zone temperature is lower than the unoccupied heating setpoint,
• yEndSetBac: if the zone temperature is higher than the unoccupied heating setpoint with the given limit bouLim, then the zone should be out of the setback mode,
• TCooSetOff: the zone unoccupied cooling setpoint,
• yHigUnoCoo: if the zone temperature is higher than the unoccupied cooling setpoint,
• yEndSetUp: if the zone temperature is lower than the unoccupied cooling setpoint with the given limit bouLim, then the zone should be out of the setup mode.

Revisions

• June 10 15, 2020, by Jianjun Hu:
  Simplified implementation.
• January 15, 2020, by Jianjun Hu:
  First implementation.