<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
    xmlns:ssd="http://ssp-standard.org/SSP1/SystemStructureDescription"
    xmlns:ssc="http://ssp-standard.org/SSP1/SystemStructureCommon"
    targetNamespace="http://ssp-standard.org/SSP1/SystemStructureDescription"
    attributeFormDefault="unqualified">
    <xs:annotation>
        <xs:documentation xml:lang="en">
            This is the normative XML Schema 1.0 schema for the MAP SSP
            SystemStructureDescription 1.0 format.

            Version: 1.0

            Copyright 2016 -- 2019 Modelica Association Project "SSP"

            Redistribution and use in source and binary forms, with or
            without modification, are permitted provided that the
            following conditions are met:

            1. Redistributions of source code must retain the above
               copyright notice, this list of conditions and the
               following disclaimer.

            2. Redistributions in binary form must reproduce the above
               copyright notice, this list of conditions and the
               following disclaimer in the documentation and/or other
               materials provided with the distribution.

            THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
            CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
            INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
            MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
            DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
            CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
            INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
            (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
            GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
            BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
            LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
            (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
            OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
            POSSIBILITY OF SUCH DAMAGE.
        </xs:documentation>
    </xs:annotation>

    <xs:import namespace="http://ssp-standard.org/SSP1/SystemStructureCommon" schemaLocation="SystemStructureCommon.xsd"/>

    <xs:element name="SystemStructureDescription">
        <xs:complexType>
            <xs:sequence>
                <xs:element name="System" type="ssd:TSystem"/>
                <xs:element name="Enumerations" minOccurs="0" type="ssc:TEnumerations"/>
                <xs:element name="Units" minOccurs="0" type="ssc:TUnits"/>
                <xs:element name="DefaultExperiment" minOccurs="0" type="ssd:TDefaultExperiment"/>
                <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
            </xs:sequence>
            <xs:attribute name="version" use="required">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        Version of SSD format, 1.0 for this release.
                    </xs:documentation>
                </xs:annotation>
                <xs:simpleType>
                    <xs:restriction base="xs:normalizedString">
                        <xs:pattern value="1[.][0-9]+(-.*)?"/>
                    </xs:restriction>
                </xs:simpleType>
            </xs:attribute>
            <xs:attribute name="name" type="xs:string" use="required">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        This attribute gives the system structure a name, which can be used
                        for purposes of presenting the system structure to the user, e.g.
                        when selecting individual variant SSDs from an SSP.
                    </xs:documentation>
                </xs:annotation>
            </xs:attribute>
            <xs:attributeGroup ref="ssc:ABaseElement"/>
            <xs:attributeGroup ref="ssc:ATopLevelMetaData"/>
        </xs:complexType>
    </xs:element>

    <xs:complexType name="TElement">
        <xs:annotation>
            <xs:documentation xml:lang="en">
                This is the base type for all elements, currently consisting of components and systems.
            </xs:documentation>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="Connectors" minOccurs="0" type="ssd:TConnectors">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        The set of connectors of this element, which represent
                        the interface of the element to the outside world.

                        For components the set of connectors must match variable/ports
                        of the underlying component implementation, e.g. the referenced
                        FMU, by name.

                        Note that there is no requirement that connectors must
                        be present for all variables/ports of an underlying
                        component implementation.  Only those connectors must
                        be present which are referenced in connections inside
                        the SSD.
                    </xs:documentation>
                </xs:annotation>
            </xs:element>
            <xs:element name="ElementGeometry" minOccurs="0">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        This optional element defines the geometry information of the component.
                        (x1,y1) and (x2,y2) define the positions of the lower-left and upper-right
                        corners of the component in the coordinate system of the parent.
                        x1>x2 indicates horizontal flipping, y1>y2 indicates vertical flipping.
                        The optional attribute rotation (in degrees) defines an additional rotation
                        (applied after flipping), where positive numbers indicate left rotation (x->y).
                        The coordinate system is oriented: x -> right, y -> up.

                        The optional attribute iconSource defines an icon URI with the same semantics as
                        for the source attribute of the Component element.  If defined, this icon overrides
                        any icon that may be defined e.g. in an .fmu file (as disccused in the FMI group).
                        The optional attribute rotation defines the rotation (in degrees) of the icon.
                        The optional attribute FixedAspectRatio defines whether the icon shall be fit
                        into the extent defined by (x1,y1), (x2,y2) and iconRotation with fixed aspect
                        ratio. The optional attribute iconFlip defines whether any flipping indicated
                        by (x1,y1), (x2, y2) shall be applied to the icon graphics, too.
                    </xs:documentation>
                </xs:annotation>
                <xs:complexType>
                    <xs:attribute name="x1" type="xs:double" use="required"/>
                    <xs:attribute name="y1" type="xs:double" use="required"/>
                    <xs:attribute name="x2" type="xs:double" use="required"/>
                    <xs:attribute name="y2" type="xs:double" use="required"/>
                    <xs:attribute name="rotation" type="xs:double" use="optional" default="0.0"/>
                    <xs:attribute name="iconSource" type="xs:anyURI" use="optional"/>
                    <xs:attribute name="iconRotation" type="xs:double" use="optional" default="0.0"/>
                    <xs:attribute name="iconFlip" type="xs:boolean" use="optional" default="false"/>
                    <xs:attribute name="iconFixedAspectRatio" type="xs:boolean" use="optional" default="false"/>
                </xs:complexType>
            </xs:element>
            <xs:element name="ParameterBindings" minOccurs="0" type="ssd:TParameterBindings">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        The set of parameter bindings for this element.
                    </xs:documentation>
                </xs:annotation>
            </xs:element>
        </xs:sequence>
        <xs:attributeGroup ref="ssc:ABaseElement"/>
        <xs:attribute name="name" use="required">
            <xs:annotation>
                <xs:documentation xml:lang="en">
                    This attribute gives the element a name, which shall be unique
                    within the directly enclosing system. The name is used for
                    purposes of specifying the element's connectors in connections.
                </xs:documentation>
            </xs:annotation>
            <xs:simpleType>
                <xs:restriction base="xs:string">
                    <xs:minLength value="1"/>
                </xs:restriction>
            </xs:simpleType>
        </xs:attribute>
    </xs:complexType>

    <xs:complexType name="TComponent">
        <xs:complexContent>
            <xs:extension base="ssd:TElement">
                <xs:sequence>
                    <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                </xs:sequence>
                <xs:attribute name="type" type="xs:string" use="optional" default="application/x-fmu-sharedlibrary">
                    <xs:annotation>
                        <xs:documentation xml:lang="en">
                            This attribute specifies the MIME type of the component, which defaults to
                            application/x-fmu-sharedlibrary to indicate an FMU.  When referencing another
                            system structure definition file, the MIME type application/x-ssp-definition
                            is used, and the MIME type application/x-ssp-package is used for referenced
                            system structure packages (SSPs). No further types are currently defined.
                        </xs:documentation>
                    </xs:annotation>
                </xs:attribute>
                <xs:attribute name="source" type="xs:anyURI" use="required">
                    <xs:annotation>
                        <xs:documentation xml:lang="en">
                            This attribute indicates the source of the component as an URI
                            (cf. RFC 3986).  For purposes of the resolution of relative URIs
                            the base URI is the URI of the SSD.  Therefore for components
                            that are located alongside the SSD, relative URIs without scheme
                            and authority can and should be used to specify the component
                            sources.  For components that are packaged inside an SSP that
                            contains this SSD, this is mandatory (in this way, the SSD URIs
                            remain valid after unpacking the SSP into the filesystem).

                            E.g. for an FMU called MyDemoFMU.fmu, that is located in the
                            resources directory of an SSP, the correct URI would be
                            "resources/MyDemoFMU.fmu".

                            When referencing another SSP, by default the default SSD of the
                            SSP (i.e. SystemStructure.ssd) is referenced.  When a non-default
                            SSD should be selected, then the name of the non-default SSD must
                            be given through a fragment identifier, i.e. the URI
                            "resources/SubSSP.ssp#VariantB.ssd" would reference the VariantB.ssd
                            of SubSSP.ssp located in the resources directory relative to this SSD.

                            When the URI is a same-document URI with a fragment identifier, e.g.
                            "#other-system", then the fragment identifier should identify a
                            system element in this SSD document with an id attribute identical
                            to the fragment identifier.  This mechanism can be used to instantiate
                            an embedded system definition multiple times through reference to
                            its definition element.

                            Note that implementations are only required to support relative URIs
                            as specified above, and that especially relative URIs that move beyond
                            the baseURI (e.g. go "up" a level via ..) are not required to be
                            supported by implementations, and are in fact often not supported for
                            security or other reasons.  Implementations are also not required to
                            support any absolute URIs and any specific URI schemes (but are of
                            course allowed to support any and all kinds of URIs where useful).
                        </xs:documentation>
                    </xs:annotation>
                </xs:attribute>
                <xs:attribute name="implementation" use="optional" default="any">
                    <xs:annotation>
                        <xs:documentation xml:lang="en">
                            When the referenced component is an FMU that contains multiple
                            implementations (e.g. Co-Simulation and Model Exchange), this optional
                            attribute can be used to determine which FMU implementation should be
                            employed.  If the attribute is missing or uses the default value "any",
                            the importing tool is free to choose what kind of FMU implementation
                            to use.  If the value is "CoSimulation" or "ModelExchange" the corresponding
                            FMU implementation must be used.  It is an error if the specified type
                            of FMU implementation is not present in the FMU.
                        </xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="any"/>
                            <xs:enumeration value="ModelExchange"/>
                            <xs:enumeration value="CoSimulation"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
            </xs:extension>
        </xs:complexContent>
    </xs:complexType>

    <xs:complexType name="TSignalDictionaries">
        <xs:sequence>
            <xs:element name="SignalDictionary" maxOccurs="unbounded">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        This element defines a signal dictionary, describing the signal dictionary
                        entries present in the signal dictionary.

                        The contents of the element can be used to provide a signal dictionary
                        inline, in which case the source attribute of the SignalDictionary element
                        must be empty.

                        The contents must be an ssb:SignalDictionary element, if the type attribute
                        of this element is application/x-ssp-signal-dictionary, or any other valid
                        XML content if the type attribute references another MIME type (in that case
                        there should be a layered specification that defines how embedding the content
                        works for that MIME type).
                    </xs:documentation>
                </xs:annotation>
                <xs:complexType>
                    <xs:choice>
                        <!-- NOTE: In XML Schema 1.1 this choice would also contain the following entry:

                             <xs:element ref="ssb:SignalDictionary"/>

                             which specifies the proper way to directly embed a SignalDictionary inline.
                             Due to restrictions in XML Schema 1.0, this would lead to a violation of the
                             unique particle attribution schema component constraint, since the embedded
                             ssb:SignalDictionary element would also be matched by the more generic xs:any
                             specification.  Since XML Schema 1.1 validators are still rare compared with
                             1.0 validators, the default schema files for SSP are still restricted to 1.0;
                             however if you have access to a 1.1 validator/validating parser, you can
                             use the 1.1 variant of these stylesheets instead.
                        -->
                        <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
                    </xs:choice>
                    <xs:attributeGroup ref="ssc:ABaseElement"/>
                    <xs:attribute name="type" type="xs:string" use="optional" default="application/x-ssp-signal-dictionary"/>
                    <xs:attribute name="source" type="xs:anyURI" use="optional">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute indicates the source of the signal dictionary as a URI
                                (cf. RFC 3986).  For purposes of the resolution of relative URIs
                                the base URI is the URI of the SSD.

                                If the source attribute is missing, the signal dictionary is provided
                                inline as contents of the SignalDictionary element, which must be
                                empty otherwise.

                                For the default type application/x-ssp-signal-dictionary such inline
                                content must be an ssb:SignalDictionary element.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                    <xs:attribute name="name" type="xs:string" use="required">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute gives the signal dictionary a name, which shall be
                                unique within the directly enclosing system. The name is used for
                                purposes of specifying the signal dictionary referenced by a
                                signal dictionary reference.  Name lookups occur in hierarchical
                                fashion, i.e. the name is first looked up in the system that
                                contains a signal dictionary reference.  If that lookup yields
                                no match, the lookup is performed on the enclosing system, etc.,
                                until a match is found.  It is an error if no matching signal
                                dictionary is found.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                </xs:complexType>
            </xs:element>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="TSignalDictionaryReference">
        <xs:complexContent>
            <xs:extension base="ssd:TElement">
                <xs:sequence>
                    <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                </xs:sequence>
                <xs:attribute name="dictionary" type="xs:string" use="required">
                    <xs:annotation>
                        <xs:documentation xml:lang="en">
                            This attribute gives the name of the signal dictionary that is to
                            be referenced.  Name lookups occur in hierarchical fashion, i.e.
                            the name is first looked up in the system that contains a signal
                            dictionary reference.  If that lookup yields no match, the lookup
                            is performed on the enclosing system, etc., until a match is found.
                            It is an error if no matching signal dictionary is found.
                        </xs:documentation>
                    </xs:annotation>
                </xs:attribute>
            </xs:extension>
        </xs:complexContent>
    </xs:complexType>

    <xs:complexType name="TSystem">
        <xs:annotation>
            <xs:documentation xml:lang="en">
                This element describes a system, which can contain components and other systems as elements,
                connectors as an interface to the outside world, and connections connecting the connectors
                of itself and of its elements to another.
            </xs:documentation>
        </xs:annotation>
        <xs:complexContent>
            <xs:extension base="ssd:TElement">
                <xs:sequence>
                    <xs:element name="Elements" minOccurs="0">
                        <xs:complexType>
                            <xs:sequence>
                                <xs:choice maxOccurs="unbounded">
                                    <xs:element name="Component" type="ssd:TComponent"/>
                                    <xs:element name="SignalDictionaryReference" type="ssd:TSignalDictionaryReference"/>
                                    <xs:element name="System" type="ssd:TSystem"/>
                                </xs:choice>
                            </xs:sequence>
                        </xs:complexType>
                    </xs:element>
                    <xs:element name="Connections" minOccurs="0">
                        <xs:complexType>
                            <xs:sequence>
                                <xs:element name="Connection" maxOccurs="unbounded">
                                    <xs:annotation>
                                        <xs:documentation xml:lang="en">
                                            This element specifies a connection between two connectors,
                                            either of the system or its directly contained elements.
                                            Note that connections between connectors on a system are
                                            allowed, so neither startElement nor endElement has to be
                                            supplied.

                                            Note also that the terms start and end in the attribute names
                                            of the connector, like startElement or endConnector, do not
                                            denote directionality of the data flow implied by the connector.
                                            That is determined by the combination of the semantics of the
                                            actual connectors (variables/ports) connected and their kind
                                            attributes:

                                            For component to component connections as well as for connections
                                            between two connectors at the system level, currently the kind of
                                            one connector must be output and of another connector must be
                                            input, or for parameter connections the kind of one connector
                                            must be calculatedParameter and the other must be parameter.
                                            Information flows from the output/calculatedParameter to the
                                            input/parameter connector.

                                            For system to component connections the kinds of the connectors
                                            must match, i.e. either both are input or both output or both
                                            parameter or both calculatedParameter.
                                        </xs:documentation>
                                    </xs:annotation>
                                    <xs:complexType>
                                        <xs:sequence>
                                            <xs:group ref="ssc:GTransformationChoice" minOccurs="0" maxOccurs="1">
                                                <xs:annotation>
                                                    <xs:documentation xml:lang="en">
                                                        This optional element specifies a transformation that is to be applied to the
                                                        source value prior to its conveyance to the target.
                                                    </xs:documentation>
                                                </xs:annotation>
                                            </xs:group>
                                            <xs:element name="ConnectionGeometry" minOccurs="0">
                                                <xs:annotation>
                                                    <xs:documentation xml:lang="en">
                                                        This optional element defines the geometry information of the connection.
                                                        The start and end coordinates of the connection are derived automatically
                                                        through the coordinates of the corresponding connectors.  The only relevant
                                                        geometry information provided by the connection geometry is a, by default
                                                        empty, list of intermediate waypoint coordinates, which are to be interpreted
                                                        as for the svg:polyline primitive, i.e. as waypoints for straight line
                                                        segments, with the first and last points added automatically based on the
                                                        translated coordinates of the start and end connectors.

                                                        Note that x and y coordinates are in the coordinate system of the
                                                        enclosing system.
                                                    </xs:documentation>
                                                </xs:annotation>
                                                <xs:complexType>
                                                    <xs:attribute name="pointsX" use="required">
                                                        <xs:simpleType>
                                                            <xs:list itemType="xs:double"/>
                                                        </xs:simpleType>
                                                    </xs:attribute>
                                                    <xs:attribute name="pointsY" use="required">
                                                        <xs:simpleType>
                                                            <xs:list itemType="xs:double"/>
                                                        </xs:simpleType>
                                                    </xs:attribute>
                                                </xs:complexType>
                                            </xs:element>
                                            <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                                        </xs:sequence>
                                        <xs:attributeGroup ref="ssc:ABaseElement"/>
                                        <xs:attribute name="startElement" type="xs:string" use="optional">
                                            <xs:annotation>
                                                <xs:documentation xml:lang="en">
                                                    This attribute gives the name of the element that contains
                                                    the connector given as startConnector.  If the attribute
                                                    is elided, then the startConnector names a connector on
                                                    this system.
                                                </xs:documentation>
                                            </xs:annotation>
                                        </xs:attribute>
                                        <xs:attribute name="startConnector" type="xs:string" use="required">
                                            <xs:annotation>
                                                <xs:documentation xml:lang="en">
                                                    This attribute gives the name of the connector that is
                                                    the start of the connection.  If startElement is not
                                                    supplied this indicates a connector on this system,
                                                    otherwise the connector is to be found on the given
                                                    element.
                                                </xs:documentation>
                                            </xs:annotation>
                                        </xs:attribute>
                                        <xs:attribute name="endElement" type="xs:string" use="optional">
                                            <xs:annotation>
                                                <xs:documentation xml:lang="en">
                                                    This attribute gives the name of the element that contains
                                                    the connector given as endConnector.  If the attribute
                                                    is elided, then the endConnector names a connector on
                                                    this system.
                                                </xs:documentation>
                                            </xs:annotation>
                                        </xs:attribute>
                                        <xs:attribute name="endConnector" type="xs:string" use="required">
                                            <xs:annotation>
                                                <xs:documentation xml:lang="en">
                                                    This attribute gives the name of the connector that is
                                                    the end of the connection.  If endElement is not
                                                    supplied this indicates a connector on this system,
                                                    otherwise the connector is to be found on the given
                                                    element.
                                                </xs:documentation>
                                            </xs:annotation>
                                        </xs:attribute>
                                        <xs:attribute name="suppressUnitConversion" type="xs:boolean" use="optional" default="false">
                                            <xs:annotation>
                                                <xs:documentation xml:lang="en">
                                                    This attribute specifies whether automatic conversions between start
                                                    and end connector are performed using unit information potentially
                                                    available for both start and end definitions.  If this attribute is
                                                    supplied and its value is true, then the environment will not perform
                                                    any automatic unit conversions, otherwise automatic unit
                                                    conversions can be performed.  This is also useful in conjunction with
                                                    the optional linear transformation supplied via the LinearTransformation
                                                    element: With suppressUnitConversion = true, the linear transformation
                                                    is performed instead of any unit conversions, whereas otherwise the
                                                    linear transformation is performed in addition to any unit conversions.
                                                </xs:documentation>
                                            </xs:annotation>
                                        </xs:attribute>
                                    </xs:complexType>
                                </xs:element>
                            </xs:sequence>
                        </xs:complexType>
                    </xs:element>
                    <xs:element name="SignalDictionaries" minOccurs="0" type="ssd:TSignalDictionaries"/>
                    <xs:element name="SystemGeometry" minOccurs="0">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This optional element defines the extent of the system canvas.
                                (x1,y1) and (x2,y2) define the lower-left and upper-right
                                corner, respectively.

                                Different from ElementGeometry, where x1>x2 and y1>y2 indicate
                                flipping, x1 &lt; x2 and y1 &lt; y2 must hold here.

                                If undefined, the system canvas extent defaults to the bounding
                                box of all ElementGeometry elements of the child elements of the
                                system.

                                When displaying the content of a sub-system together with the
                                enclosing parent system, the transformation of co-coordinates
                                inside the sub-system to co-ordinates in the parent system is defined
                                by the transformation from SystemGeometry.{x1,y1,x2,y2} to
                                ElementGeometry.{x1', y1', x2', y2'}, where ElementGeometry.z'
                                is the respective coordinate of the sub-system when instantiated
                                in the parent system after rotation.
                            </xs:documentation>
                        </xs:annotation>
                        <xs:complexType>
                            <xs:attribute name="x1" type="xs:double" use="required"/>
                            <xs:attribute name="y1" type="xs:double" use="required"/>
                            <xs:attribute name="x2" type="xs:double" use="required"/>
                            <xs:attribute name="y2" type="xs:double" use="required"/>
                        </xs:complexType>
                    </xs:element>
                    <xs:element name="GraphicalElements" minOccurs="0">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This optional element contains the set of purely graphical elements
                                that are contained in the system, e.g. things like notes, which have no
                                semantic impact on the system but aid in presentation of the system in
                                graphical user interfaces.

                                Currently the only graphical element defined is the Note element, which
                                allows for simple textual notes to be placed into the system diagram, but
                                in the future more elements might be added as needed for exchange of
                                graphical information.
                            </xs:documentation>
                        </xs:annotation>
                        <xs:complexType>
                            <xs:sequence>
                                <xs:choice maxOccurs="unbounded">
                                    <xs:element name="Note">
                                        <xs:annotation>
                                            <xs:documentation xml:lang="en">
                                                This element defines a graphical note to be placed on the canvas of the
                                                enclosing system.  It is sized using the attributes so that the coordinates
                                                (x1,y1) and (x2,y2) define the positions of the lower-left and upper-right
                                                corners of the note in the coordinate system of the parent.

                                                The note text is given by the text attribute.  The presentation expectation
                                                is that the text is automatically sized ad wrapped in such a way that it
                                                fits the note area.  If this would lead to too small text, it might be
                                                necessary to provide an interactive method (like expanding triangle, or popup,
                                                or other means) to show the remainder of the note text.  Inside the text
                                                attribute, newlines indicate paragraph breaks.
                                            </xs:documentation>
                                        </xs:annotation>
                                        <xs:complexType>
                                            <xs:attribute name="x1" type="xs:double" use="required"/>
                                            <xs:attribute name="y1" type="xs:double" use="required"/>
                                            <xs:attribute name="x2" type="xs:double" use="required"/>
                                            <xs:attribute name="y2" type="xs:double" use="required"/>
                                            <xs:attribute name="text" type="xs:string" use="required"/>
                                        </xs:complexType>
                                    </xs:element>
                                </xs:choice>
                            </xs:sequence>
                        </xs:complexType>
                    </xs:element>
                    <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                </xs:sequence>
            </xs:extension>
        </xs:complexContent>
    </xs:complexType>

    <xs:complexType name="TConnectors">
        <xs:sequence>
            <xs:element name="Connector" maxOccurs="unbounded">
                <xs:complexType>
                    <xs:sequence>
                        <xs:group ref="ssc:GTypeChoice" minOccurs="0">
                            <xs:annotation>
                                <xs:documentation xml:lang="en">
                                    This element gives the type of the connector.

                                    If a type is not supplied, the type is determined through
                                    default mechanisms: For FMU components, the type of the
                                    underlying variable would be used, for systems the types
                                    of connected underlying connectors could be used if unambiguous.
                                    If a type cannot be deduced unambinguously, the user should
                                    be informed of this error. Equally, if the type of the connector
                                    differs from the type of the underlying FMU variable this
                                    constitutes an error.
                                </xs:documentation>
                            </xs:annotation>
                        </xs:group>
                        <xs:element name="ConnectorGeometry" minOccurs="0">
                            <xs:annotation>
                                <xs:documentation xml:lang="en">
                                    This optional element gives the geometry information of the connector.
                                    Note that x and y coordinates are in a special coordinate system, where
                                    0,0 is the lower-left corner of the component/system, and 1,1 is the
                                    upper-right corner of the component, regardless of aspect ratio.

                                    For systems the placement of connectors for the inside and outside
                                    view of the system is identical, the special coordinate system is just
                                    translated to different actual coordinate systems, namely the one
                                    determined by the ElementGeometry for the outside view, and the
                                    one determined by SystemGeometry for the inside view.
                                </xs:documentation>
                            </xs:annotation>
                            <xs:complexType>
                                <xs:attribute name="x" type="xs:double" use="required"/>
                                <xs:attribute name="y" type="xs:double" use="required"/>
                            </xs:complexType>
                        </xs:element>
                        <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                    </xs:sequence>
                    <xs:attributeGroup ref="ssc:ABaseElement"/>
                    <xs:attribute name="name" use="required">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute gives the connector a name, which
                                shall be unique within the component or system and,
                                for components, must match the name of a relevant
                                variable/port in the underlying component implementation,
                                e.g. the referenced FMU.

                                Note that there is no requirement that connectors must
                                be present for all variables/ports of an underlying
                                component implementation.  Only those connectors must
                                be present which are referenced in connections inside
                                the SSD.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                    <xs:attribute name="kind" use="required">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute specifies the kind of the given connector,
                                which indicates whether the connector is an input, an
                                output, both (inout), a parameter or a calculated parameter (i.e.
                                a parameter that is calculated by the component during initialization).
                                For components this must match the related kind of the underlying
                                component implementation, e.g. for referenced FMUs it must match the
                                combination of variability and causality.

                                For FMI 2.0 this means that the causality of the variable must
                                match the kind of the connector.

                                For FMI 1.0 this means that for connectors of kind input or output
                                the causality of the variable must be input or output and the
                                variability of the variable must be discrete or continuous (for
                                outputs also constant and parameter are allowable).  For connectors
                                of kind parameter the causality must be input or internal and the
                                variablity must be parameter.  For connectors of kind
                                calculatedParameter the causality must be output and the variablity
                                must be parameter.

                                For SignalDictionaryReferences, the kind of a given connector can
                                additionally be 'inout', which indicates that the semantics of the
                                connector are derived from the connections going to the connector.
                                This can be used for example to allow a connector to function as
                                both an input and output within the same SignaleDictionaryReference.
                            </xs:documentation>
                        </xs:annotation>
                        <xs:simpleType>
                            <xs:restriction base="xs:string">
                                <xs:enumeration value="input"/>
                                <xs:enumeration value="output"/>
                                <xs:enumeration value="parameter"/>
                                <xs:enumeration value="calculatedParameter"/>
                                <xs:enumeration value="inout"/>
                            </xs:restriction>
                        </xs:simpleType>
                    </xs:attribute>
                </xs:complexType>
            </xs:element>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="TParameterBindings">
        <xs:sequence maxOccurs="unbounded">
            <xs:element name="ParameterBinding">
                <xs:annotation>
                    <xs:documentation xml:lang="en">
                        This provides a parameter binding for a component or system.  For FMU components this
                        allows the parametrization of the FMU's parameters and start values of other variables
                        with a parameter source (e.g. a parameter file).  Note that in this case the names
                        provided in the parameter source must match the names of the FMU variables, or must be
                        mapped to the names of the FMU variables through a ParameterMapping element, or are
                        ignored if no matching variable is found.

                        For systems the names in the parameter source must either match the hierarchical names
                        of parameters or other variables in the system, or must be mapped to those names through
                        a ParameterMapping element, or are ignored if no matching variable is found.

                        The hierarchical names of the parameters or other variables of a system are formed in the
                        following way: Any variables of the system exposed through connectors of the system have
                        the name of the connector as their name.  For all elements of the system, the hierarchical
                        names of the variables of those elements are formed by prepending the element name and a
                        dot to the hierarchical names of the variables in that element.  E.g. for a system A
                        containing a system B which contains an exposed parameter named SP1 and an element C with
                        a parameter P2, the hierarchical names of the parameters in system A are B.SP1 and B.C.P2
                        respectively.  The hierarchical name of those parameters inside system B are SP1 and C.P2
                        respectively.

                        More than one ParameterBinding can be supplied, in which case all of the parameters found
                        will be used to parametrize the component, with parameter values in ParameterBinding
                        sources appearing at a succeeding position in the element order taking priority over prior
                        sources at the same hierarchy level, should a parameter be included in more than one
                        ParameterBinding source.

                        When ParameterBinding sources on multiple levels of the hierarchy supply values for the
                        same parameter, bindings at a higher hierarchy level take precedence over lower levels,
                        i.e. bindings at a system level take precedence over bindings at a sub-system or component
                        level.

                        Parameter bindings for FMU components can be used to set any initial values in the
                        FMU which are legal to change.  It is assumed that the parameterization is applied
                        prior to initializing for FMI 1.0, or before entering initialization mode for FMI 2.0.
                        This means that variables eligible for parameterization are those with:
                          * either causality = "input" or a start value for FMI 1.0
                          * variability != "constant" and initial = "exact" or "approx" for FMI 2.0

                        All kinds of system connectors can be parameterized.  In case the system level connectors
                        are connected to FMU components, the parameterization must be compatible with the variable
                        in the connected FMU.

                        ParameterBindings that apply to a component that references another SSD/SSP are handled
                        as if the top-level system of the SSD/SSP was present in the enclosing system instead of
                        the component with one special case: Any parameter bindings in the component are treated
                        as if they were present in the top-level system of the SSP/SSD after all parameter bindings
                        of the system.  Therefore they take priority over any of the existing parameter bindings
                        (for parameters with identical names).
                    </xs:documentation>
                </xs:annotation>
                <xs:complexType>
                    <xs:sequence>
                        <xs:element name="ParameterValues" minOccurs="0">
                            <xs:annotation>
                                <xs:documentation xml:lang="en">
                                    This optional element can be used to provide parameter values inline
                                    to the parameter binding, in which case the source attribute of the
                                    ParameterBinding element must be empty.

                                    The contents must be an ssv:ParameterSet element, if the type attribute
                                    of the ParameterBinding element is application/x-ssp-parameter-set, or
                                    any other valid XML content if the type attribute references another
                                    MIME type (in that case there should be a layered specification that
                                    defines how embedding the content works for that MIME type).
                                </xs:documentation>
                            </xs:annotation>
                            <xs:complexType>
                                <xs:choice>
                                    <!-- NOTE: In XML Schema 1.1 this choice would also contain the following entry:

                                         <xs:element ref="ssv:ParameterSet"/>

                                         which specifies the proper way to directly embed a ParameterSet inline.
                                         Due to restrictions in XML Schema 1.0, this would lead to a violation of the
                                         unique particle attribution schema component constraint, since the embedded
                                         ssv:ParameterSet element would also be matched by the more generic xs:any
                                         specification.  Since XML Schema 1.1 validators are still rare compared with
                                         1.0 validators, the default schema files for SSP are still restricted to 1.0;
                                         however if you have access to a 1.1 validator/validating parser, you can
                                         use the 1.1 variant of these stylesheets instead.
                                    -->
                                    <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
                                </xs:choice>
                            </xs:complexType>
                        </xs:element>
                        <xs:element name="ParameterMapping" minOccurs="0">
                            <xs:annotation>
                                <xs:documentation xml:lang="en">
                                    This element provides an optional parameter mapping, which specifies how
                                    the parameter names and values provided in the parameter source are to be
                                    mapped to the parameters of the component or system in question.  If no
                                    mapping is supplied, the parameter names of the parameter source are used
                                    as is for name matching against the names of parameters in the component
                                    or system and the values of the parameter source are not transformed further
                                    before being applied.

                                    The contents of the element can be used to provide a parameter mapping
                                    inline, in which case the source attribute of the ParameterMapping element
                                    must be empty.

                                    The contents must be an ssm:ParameterMapping element, if the type attribute
                                    of this element is application/x-ssp-parameter-mapping, or any other valid
                                    XML content if the type attribute references another MIME type (in that case
                                    there should be a layered specification that defines how embedding the content
                                    works for that MIME type).
                                </xs:documentation>
                            </xs:annotation>
                            <xs:complexType>
                                <xs:choice>
                                    <!-- NOTE: In XML Schema 1.1 this choice would also contain the following entry:

                                         <xs:element ref="ssm:ParameterMapping"/>

                                         which specifies the proper way to directly embed a ParameterMapping inline.
                                         Due to restrictions in XML Schema 1.0, this would lead to a violation of the
                                         unique particle attribution schema component constraint, since the embedded
                                         ssm:ParameterMapping element would also be matched by the more generic xs:any
                                         specification.  Since XML Schema 1.1 validators are still rare compared with
                                         1.0 validators, the default schema files for SSP are still restricted to 1.0;
                                         however if you have access to a 1.1 validator/validating parser, you can
                                         use the 1.1 variant of these stylesheets instead.
                                    -->
                                    <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
                                </xs:choice>
                                <xs:attributeGroup ref="ssc:ABaseElement"/>
                                <xs:attribute name="type" type="xs:string" use="optional" default="application/x-ssp-parameter-mapping"/>
                                <xs:attribute name="source" type="xs:anyURI" use="optional">
                                    <xs:annotation>
                                        <xs:documentation xml:lang="en">
                                            This attribute indicates the source of the parameter mapping as a URI
                                            (cf. RFC 3986).  For purposes of the resolution of relative URIs
                                            the base URI is the URI of the SSD, if the sourcebase attribute
                                            is not specified or is specified as SSD, and the URI of the
                                            referenced component if the base attribute is specified as component.
                                            This allows the specification of parameter mapping sources that reside
                                            inside the component (e.g. an FMU) through relative URIs.

                                            If the source attribute is missing, the parameter mapping is provided
                                            inline as contents of the ParameterMapping element, which must be
                                            empty otherwise.
                                        </xs:documentation>
                                    </xs:annotation>
                                </xs:attribute>
                                <xs:attribute name="sourceBase" use="optional" default="SSD">
                                    <xs:annotation>
                                        <xs:documentation xml:lang="en">
                                            Defines the base the source URI is resolved against:  If the attribute
                                            is missing or is specified as SSD, the source is resolved against the
                                            URI of the SSD, if the attribute is specified as component the URI is
                                            resolved against the (resolved) URI of the component source.
                                        </xs:documentation>
                                    </xs:annotation>
                                    <xs:simpleType>
                                        <xs:restriction base="xs:string">
                                            <xs:enumeration value="SSD"/>
                                            <xs:enumeration value="component"/>
                                        </xs:restriction>
                                    </xs:simpleType>
                                </xs:attribute>
                            </xs:complexType>
                        </xs:element>
                        <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
                    </xs:sequence>
                    <xs:attributeGroup ref="ssc:ABaseElement"/>
                    <xs:attribute name="type" type="xs:string" use="optional" default="application/x-ssp-parameter-set">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute specifies the MIME type of the parameter source, which defaults
                                to application/x-ssp-parameter-set to indicate the SSP parameter set file format.
                                No further types are currently defined, but can of course be added at a later
                                date, e.g. for pre-existing parameter file formats, like CDF, etc.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                    <xs:attribute name="source" type="xs:anyURI" use="optional">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                This attribute indicates the source of the parameters as a URI
                                (cf. RFC 3986).  For purposes of the resolution of relative URIs
                                the base URI is the URI of the SSD, if the sourcebase attribute
                                is not specified or is specified as SSD, and the URI of the
                                referenced component if the base attribute is specified as component.
                                This allows the specification of parameter sources that reside inside
                                the component (e.g. an FMU) through relative URIs.

                                Access to parameter sets over the SSP Parameter Repository Protocol
                                is mediated through URIs with the http or https scheme.

                                If the source attribute is missing, the parameter mapping is provided
                                inline as contents of a ParameterValues element, which must not be
                                present otherwise.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                    <xs:attribute name="sourceBase" use="optional" default="SSD">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                Defines the base the source URI is resolved against:  If the attribute
                                is missing or is specified as SSD, the source is resolved against the
                                URI of the SSD, if the attribute is specified as component the URI is
                                resolved against the (resolved) URI of the component source.
                            </xs:documentation>
                        </xs:annotation>
                        <xs:simpleType>
                            <xs:restriction base="xs:string">
                                <xs:enumeration value="SSD"/>
                                <xs:enumeration value="component"/>
                            </xs:restriction>
                        </xs:simpleType>
                    </xs:attribute>
                    <xs:attribute name="prefix" type="xs:string" use="optional" default="">
                        <xs:annotation>
                            <xs:documentation xml:lang="en">
                                Defines the optional prefix for name resolution and mapping purposes
                                for this binding.  If this attribute is empty or not supplied no
                                prefix is used for name resolution and mapping, otherwise the specified
                                prefix is prepended to all names in the parameter source prior to
                                processing the normal name resolution or name mapping rules.  This
                                allows the user to apply a parameter set normally intended for a component
                                (and thus containing bare parameter names) at a system level targeted to
                                one element of the system by supplying the name of the element plus a dot
                                as a prefix on the binding, thus causing all parameter names in the parameter
                                set to be treated as if they were specified with proper hierarchical names.
                            </xs:documentation>
                        </xs:annotation>
                    </xs:attribute>
                </xs:complexType>
            </xs:element>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="TDefaultExperiment">
        <xs:annotation>
            <xs:documentation xml:lang="en">
                The attributes of this element, if present, specify reasonable default values
                for running an experiment of the given system.  Any tool is free to ignore this
                information.
            </xs:documentation>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="Annotations" minOccurs="0" type="ssc:TAnnotations"/>
        </xs:sequence>
        <xs:attribute name="startTime" type="xs:double" use="optional">
            <xs:annotation>
                <xs:documentation xml:lang="en">Default start time of simulation</xs:documentation>
            </xs:annotation>
        </xs:attribute>
        <xs:attribute name="stopTime" type="xs:double" use="optional">
            <xs:annotation>
                <xs:documentation xml:lang="en">Default stop time of simulation</xs:documentation>
            </xs:annotation>
        </xs:attribute>
    </xs:complexType>
</xs:schema>
